Request a quote

Bespoke

Bespoke substrate mixes

Your crop, your recipe. Choose the raw materials, structure, pH, EC and fertiliser step by step. The configurator shows straight away what your choices mean for air, water and peat status. Then you request the mix: we check the recipe, advise where needed and send you a quotation. There is no obligation.

Open the configurator Use the substrate finder

Bespoke in three steps

  1. Build Choose your crop, raw materials, structure and fertiliser in the configurator.
  2. We check We check your recipe for feasibility and advise where needed.
  3. Production and delivery Once you accept the quotation, your mix is produced and delivered: as loose bulk, in big bags or crates, or shipped by the container.

Build your mix

Enter the percentages yourself and click 'Calculate' to see the profile.

1/8

Which crop is the substrate for?

We pre-fill a recommended structure and a pH and EC range. You can change everything.

Loads the recommended composition, structure, pH and EC for the selected crop.

2/8

How much peat is acceptable?

Less peat calls for a different approach to irrigation and feeding.

If you choose peat-free, we replace the peat in your recipe with fine coir. You can then keep adjusting. Read more in the knowledge base.

3/8

Set the ratio

Divide 100% over up to six raw materials, in steps of 5%. Fine materials hold water, coarse materials add air. Lock a slider with the padlock.

peat Holds plenty of water yet stays open; naturally acidic.
peat max. 60% Water buffer and weight; finer than white peat.
Rewets quickly; stable structure.
max. 60% Open and airy; hardly settles.
max. 60% Coarse and structurally stable; slightly acidic.
max. 50% Very airy and light; needs adjusted feeding.
max. 40% Lasting extra air and drainage; inert.
max. 10% More buffering and weight; lowers the air-filled porosity slightly.

Total: 100%

With this ratio, the mix is classed as peat-based.

4/8

Which structure suits your crop?

5/8

Which pH and EC do you want on delivery?

Choose within your crop's range. We determine the lime and fertiliser rates needed to reach it.

Usual for Bedding plants: pH 5.5-6.2

Usual for Bedding plants: EC 0.5-0.9 mS/cm

Moisture content on delivery

You do not choose lime yourself: we determine the lime rate needed to reach the target pH based on the raw materials.

6/8

What else should go in?

NPK base fertiliser 14-16-18 Rate in kg/m³. Lower for propagation, higher for vigorous crops.
Coated controlled-release fertiliser Choose the release period: 3-4, 5-6 or 8-9 months. Useful for long crops and outdoor growing.
Organic fertiliser For peat-free mixes and slower, longer-lasting nutrition.
Wetting agent Helps the substrate take up water evenly, even after drying out.

7/8

How and how much would you like delivered?

An estimate is fine; the quotation is based on your final quantity. At least 5 m³, in steps of 1 m³.

Want to export the mix? Add the country and load type under Notes, or use the export form.

8/8

Your mix

Crop
Bedding plants
Edit
Peat content
Peat-based
Edit
Composition
50% White peat, 10% Black peat, 30% Fine coir, 10% Perlite
Edit
Structure
Fine, 0-10 mm
Edit
pH and EC
pH 5.8 · EC 0.7 mS/cm · Standard
Edit
Fertiliser
NPK base fertiliser 14-16-18 0.75 kg/m³, Wetting agent
Edit
Packaging
Loose bulk, 30 m³, one-off
Edit

Indicative values. The properties shown are calculated from the average properties of the raw materials. The actual values of a production batch may differ. We confirm feasibility, final specifications, price and lead time in the quotation.

Request this mix

Leave your details. We check the recipe for feasibility and send you a quotation with final specifications, price and lead time. Your full mix profile is attached automatically.

Your details

We will send a confirmation to this address.

Useful if we need to check something quickly. Please include your country code, for example +44.

Chamber of Commerce (KvK) number or the equivalent in your country.

For example NL123456789B01.

For example pot size, irrigation system or current experience.

We only use your details for this enquiry and its follow-up. No newsletter, never sold to third parties.

* required field

No obligation. You receive the price in a tailored quotation.

Start again

What the configurator does for you

A recipe is more than a ratio. The configurator translates your choices straight into the properties you manage in the crop, so you are well prepared to request a mix.

  • Indicative profile

    Air, water, structural stability and sustainability as a weighted average of the raw materials, corrected for structure. Sustainability is an indicative in-house estimate.

  • Warnings per crop

    If the pH or EC falls outside the usual range, the structure differs or the mix becomes too dense, you see it at once.

  • A quotation for your recipe

    Your enquiry reaches our team with the full recipe and profile. We check feasibility and send a quotation with final specifications.

Indicative values. The properties shown are calculated from the average properties of the raw materials. The actual values of a production batch may differ. We confirm feasibility, final specifications, price and lead time in the quotation.

Ask the assistant